Table of Contents
Advertisement
UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
setting WPa/WPa2
1�
Select "WPA/WPA2-Personal (PSK)" from the "Security Mode"
drop-down box�
2�
Select "WPA-PSK" for just WPA authentication, or "WPA2-PSK" for
just WPA2 authentication, or you may select "WPA-PSK + WPA2-
PSK" for WPA and WPA2 as the authentication type�
3�
Enter your pre-shared key� This can be from eight to 63 characters
and can be letters, numbers, or symbols� This same key must
be used on all of the clients that you set up� This pre-shared key
will allow users full access to your network including shared files
and printers�
G Wireless Router
1
2
3
4
5
6
4�
Click "Apply Changes" to finish� You must now set all clients to
match these settings depending on the type of access you want
them to have�
Guest access
The guest pre-shared key allows guest users an Internet-only access to
restrict them from entering your network and having access to files on
your PCs� Enter your pre-shared key for guest access� This can be from
eight to 63 characters and can be letters, numbers, or symbols� Click
"Apply Changes" to finish�
57
7
8
9
10
Advertisement
Table of Contents
