G Wireless Router - Belkin PM01110 User Manual

alTeRnaTe seTUP MeTHod
sections
table of contents
1� User name
This space is provided to type in your user name that was assigned by
your ISP�
2� Password
Type in your password and re-type it into the "Retype Password" box to
confirm it�
3� service name (optional)
A service name is rarely required by an ISP� If you are not sure if your
ISP requires a service name, leave this blank�
4� My Internet IP
1) Get Dynamically From ISP: Getting WAN IP address from
ISP automatically�
2) Use Static IP address: Need to enter ISP information below fields
(My IP Address)�

G Wireless Router

1 2 3 4 5 6
5� My IP address
Provided by your ISP� Enter the IP address here� (Only available
when user selects "Use Static IP address" from IP Address
Assignment above�)
6� MTU
The MTU setting should never be changed unless your ISP gives you
a specific MTU setting� Making changes to the MTU setting can cause
problems with your Internet connection including disconnection from the
Internet, slow Internet access, and problems with Internet applications
working properly�
7� disconnect after X minutes...
This feature is used to automatically disconnect the Router from your
ISP when there is no activity for a specified period of time� For instance,
placing a check mark next to this option and entering "5" into the minute
field will cause the Router to disconnect from the Internet after five
minutes of no Internet activity� This option should be used if you pay for
your Internet service by the minute�
36
7 8 9 10