Install Toner Cartridge - Canon IMAGECLASS MF4690 Starter Manual

Install Toner Cartridge

1
Remove the toner cartridge from the bag.
Keep the bag for future use.
4
A
Lift the scanning platform (A) until it is locked. (You
will hear an audible "click.")
8
Push the toner cartridge to make sure it is properly
set in the machine.
5
A
CAUTION
Do not open the drum protective shutter (A).
5
A
B
Open the toner cover (B), using the tab (A) which
covers over on dent.
9
Close the toner cover using the tab.
2
Gently rock the toner cartridge several times to
distribute toner inside.
6
A
Hold the toner cartridge by its handle (A).
10
Close the scanning platform.
3
Pull the seal completely out.
NOTE
Do not pull the seal out at an angle.
7
Insert the cartridge so that the protrusion on the
right side of the toner cartridge (A) fits into the
guide (B) located on the right side of the machine
and slide it down parallel to the guide.
CAUTION
– Be careful not to get your fingers caught.
– If you cannot close the toner cover, do not force it to
close. Open the cover and make sure the toner
cartridge is properly set in the machine.
6