Repairing The Static Multiple-Disk Parking Brake - Bosch rexroth HyDrotrAC GFt Operating Instructions Manual

Servicing and repair | HyDrotrAC GFt >130 knm

10.5.1 repairing the static multiple-disk parking brake

Hazard from multiple-disk parking brake failure!
Risk of injury or material damage caused by malfunctions as well as thermal
overload of the multiple-disk parking brake! This can lead to damage to the
multiple-disk package and to decreasing brake action or failure of the multiple-disk
parking brake.
f Always replace the disks, springs and sealing elements per axle after any
malfunction, thermal overload and during any repair work on the multiple-disk
parking brake.
f Please contact Rexroth Service in your area in case repairs are required. The
corresponding contact is indicated in appendix A "Address directory" of the
material number-specific operating instructions.
If functional impairment or thermal overload makes repairs necessary, these
must only be performed by trained staff or employees of the Rexroth Service.
The corresponding contact is indicated in appendix A "Address directory" of the
material number-specific operating instructions. The disks, springs and sealing
elements always have to be replaced per axle in such repair. Rexroth does not
assume any liability for damage of any kind due to non-observance of these
provisions.
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
WArninG
RE 79094, Issue 10.2019, Bosch Rexroth AG
51/64