Bosch rexroth HyDrotrAC GFt Operating Instructions Manual page 58

58/64 HyDrotrAC GFt >130 knm | Disassembly and replacement
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
Bosch Rexroth AG, Issue 10.2019, RE 79094
29. For the planetary gearbox weight, refer to appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
30. Attach the planetary gearbox carefully using appropriate means of attachment,
as for example eye bolts, swivel hooks, shackles or a suitable equipment on an
appropriate lifting equipment, e.g. a crane hook. Refer to chapter 6.1
"Transporting the HYDROTRAC GFT".
31. Secure the planetary gearbox against uncontrolled movements, e.g. sliding.
32. Tighten the means of attachment without lifting the planetary gearbox. Make
sure that the planetary gearbox is not tilted.
33. Untighten and remove the mounting screws of the connection between machine
or chassis frame and planetary gearbox.
34. Lift the planetary gearbox carefully from the machine or chassis frame.
35. Make sure that the surface is stable.
36. Place the disassembled planetary gearbox vertically with the cover plate down
on appropriate squared timbers on a stable underground. Secure the planetary
gearbox against tipping over.
37. Remove all means of attachment such as eye bolts, straps, chains, swivel hooks,
shackles or devices which are still attached.
38. Assemble the axial-piston motor to the planetary gearbox again. Proceed as
described in chapter 7 "Assembly".