Panasonic PT-LC75E Operating Instructions Manual page 8

<Projector control panel and remote control unit>
&
# $ %
TEMP
RGB INPUT LAMP
B The wireless remote control and the projector itself have the same control
buttons available.
# RGB INPUT indicator
(page 17)
This indicator shows whether a
signal is being input to the RGB
input connectors (RGB 1
IN/RGB2 IN). When an input
signal is detected, the indicator
illuminates.
$ LAMP indicator
(page 42)
This indicator illuminates when it
is time to replace the lamp unit. It
flashes if a circuit abnormality is
detected.
% TEMP indicator
(page 42)
This indicator illuminates if an
abnormally high temperature is
detected inside the projector or
around it. If the temperature rises
above a certain level, the power
supply will be turned off
automatically and the indicator
will illuminate or flash.
& POWER button
(pages 24 and 25)
14-E
NGLISH
All manuals and user guides at all-guides.com
( )
'
&
(
+
POWER
AUTO SETUP INPUT
-
.
STANDBY(R)
ON(G)
MENU ENTER
/
, + *
' Power indicator
(pages 24 and 25)
This indicator illuminates red
when the MAIN POWER switch is
turned on (standby mode), and
illuminates green when the power
is turned on and a picture starts
to be projected.
( AUTO SETUP button
(pages 17 and 25)
If this button is pressed while a
picture is being projected, the
projection settings will be
adjusted automatically in
accordance with the signal being
input. In addition, the angle of tilt
of the projector will be
automatically detected and
adjusted in order to correct any
keystone distortion. ("AUTO
SETUP" will appear on the
screen during adjustment.) Set
"AUTO KEYSTN" in the
OPTION1 menu to "OFF" to
prevent any deterioration of the
picture as a result of keystone
correction.
)
POWER
INPUT
VIDEO RGB
,
AUTO
MENU
SETUP *
ENTER
2
FREEZE SHUTTER
1
STD
VOLUME D.ZOOM
INDEX
WINDOW
0
PROJECTOR
) Input select (INPUT, RGB,
VIDEO) buttons
(page 24)
* ENTER button
(page 28)
This button is used to accep
to activate items selected in
on-screen menus.
+ Arrow (F F , G G , I I and H H )
buttons
(page 28)
These buttons are used to s
and adjust items in the on-s
menus.
, MENU button
(pages 26 and 28)
This button is used to displa
menu screens. When a men
screen is being displayed, it
be used to return to a previo
screen or to clear the scree
- FREEZE button
(page 29)
This button is used to
momentarily freeze the ima
that a still picture is displaye
. VOLUME +/- buttons
These buttons are used to a
the volume of the sound ou
by the projector's built-in
speakers. Refer to page 26
details on how to adjust the
volume using the buttons on
projector control panel.
/ INDEX WINDOW button
(page 39)
This button can be used to
the image projection area in
still image and a moving im
0 D.ZOOM +/- buttons
(page 30)
These buttons are used to
enlarge certain portions of t
projected image.