Ensure the appliance is switched off before connecting to the
●
mains power supply.
To disconnect the appliance, switch it "OFF", and then remove
●
the plug from outlet. Do not pull the cord to disconnect the plug.
Switch off the power supply and disconnect from mains supply
●
when not in use, before cleaning or other maintenance.
Do not operate in areas where gasoline, paint or other flam-
●
mable liquids are used or stored.
Indoor use only.
●
To prevent a possible fire, do not block air intakes or exhaust in
●
any manner.
Don't touch the hot surfaces.
●
Do not use pesticide or other flammable spray around the
●
product. Because it will damage the device and cause fire.
Do not insert or allow foreign objects to enter any ventilation or
●
exhaust opening, as this may cause an electric shock, fire or
damage to the appliance.
Always ensure that hands are dry before operating or adjusting
●
any switch on the product or touching the plug and socket-outlet.
Do not leave this appliance unattended when it's in use.
●
The most common cause of overheating is deposits of dust or
●
fluff in the appliance. Ensure these deposits are removed
regularly by disconnect the appliance and vacuum cleaning air
vents and grilles.
Do not use this heater if it has been dropped;
●
Do not use if there are visible signs of damage to the heater
●
Use this heater on a horizontal and stable surface.
●
WARNING: Do not use this heater in small rooms when they are
●
occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or
●
any other flammable material a minimum distance of 1 m from
the air outlet.
Do not place the heater on carpet; don't place the cable under
●
carpets. Arrange cord away from traffic areas so that it will not
be tripped over.
TECHNICAL SPECIFICATIONS
Model
Power
Rated voltage
Protective class
40 | 41
DF-HT5E02PC1
1400W
220-240V~ 50/60Hz
Class II
GB
Need help?
Do you have a question about the DF-HT5E02PC1 and is the answer not in the manual?