HP Invent EH861 Series Product End-Of-Life Disassembly Instructions page 3

1)
Remove 4 x securing nuts to remove the I/O SCSI PCA
3)
2 x T-10 screws from rear of
chassis.
4) Removing the PSU from chassis.
5) PSU & on / off PCB removal
EL-MF877-00
Template Revision A
4 x size '1' crosshead screws from
the underside of the PCA clamp.
2 x size T-10 screws, above / below
AC inlet. 1 x T-10 screw front, left
side of chassis.
PCA > 10 square cm's
2)
I/O PCA > 10 square cm.
2 x crosshead screws, to remove the
lid from the PSU
SCSI ribbon cable contains
brominated flame retardant
PCA > 10 square
cm's
5 x electrolytic capacitors > 2.5 cm in
height. PCA > 10 square cm's.
Page 3