Total TH110286 Quick Start Manual
Hide thumbs Also See for TH110286:

Advertisement

ROTARY HAMMER
V
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TH110286 and is the answer not in the manual?

Questions and answers

Summary of Contents for Total TH110286

  • Page 1 ROTARY HAMMER...
  • Page 2: Security Instructions

    Security instructions Caution Read all safety warnings and all instructions. Failure to follow warnings and instructions can cause electric shock, fire, and / or serious injury. Note: Save all warnings and instructions for future reference. 1) Work area safety a. Keep the work area clean and well lit to avoid accidents. b.
  • Page 3 b. Do not use the power tool if its ignition switch does not work. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool to avoid accidentally starting the tool.
  • Page 4: Additional Safety Warnings

    Safety rules for correct use Double insulation for additional protection Read the instruction manual before use. CE conformity. Wear safety glasses, hearing protection and a dust mask. Waste electrical products must not be disposed of with household waste. Please recycle at the appropriate facilities. Check with your local authority or retailer for recycling advice.
  • Page 5: Other Risks

    Other risks Even when the power tool is used as prescribed, it is not possible to eliminate all residual risk factors: a. Health defects resulting from the emission of vibrations if the power tool is used for a longer period of time or if it is not properly managed and maintained. b.
  • Page 6: Product Description

    Product description 1. Replacement chuck 6. Unlock button 2. Chuck 7. Mode selection switch 1 3. Protective dust cap 8. Mode select switch 2 4. Locking handle 9. ON / OFF switch 5. Auxiliary handle Note: The machine is designed for drilling in concrete, brick and stone. It is equally suitable for drilling in wood, metal, ceramic and plastic.
  • Page 7: Operating Modes

    Take out bits Pull the locking sleeve back and hold it while removing the bit. Use only drill bits that fit the screw heads. Set up Power on: press the ON / OFF switch • Power off: release the ON / OFF switch •...
  • Page 8: Maintenance

    If the machine should fail despite the care taken in manufacturing and testing, contact your official TOTAL brand dealer. Environment Do not dispose of electrical appliances as unsorted municipal waste, use •...
  • Page 9: Exploded View

    Exploded view...
  • Page 10 ROTARY HAMMER...

Table of Contents