Harman Kardon HD 710 Owner's Manual page 11

All manuals and user guides at all-guides.com
RANDOM PLAY
CHECKING THE CONTENTS OF THE
PROGRAM
In this mode, CD player plays the tracks
You can check the contents of the
on the CD in random sequence.
program during programming or after
completion of programming.
•
Each time the PROGRAM/CHECK
button is pressed, the programmed
tracks will appear in the programmed
sequence.
CLEARING THE PROGRAMMED
TRACKS
TIME DISPLAY SELECTION
•
Each time the STOP/CLEAR button is
pressed during programming or after
In addition to displaying the elapsed time
completion of programming, the
of the currently playing track, this unit has
programmed tracks are cleared one
two other time display modes. One mode
by one in the opposite sequence.
will indicate the total time remaining on
•
If you wish to clear a specific track,
the disc (TOTAL will light in the display).
find that track with the PROGRAM/
The other mode will indicate the time
CHECK button and clear with the
remaining on a specific track (EACH will
STOP/CLEAR button.
light in the display).
• By pressing the OPEN/CLOSE or
STOP/CLEAR button over 4 seconds
in the stop mode, all programmed
tracks will be cleared.
Uden navn-1 11
NOTE:
When a track of which number is greater
than 30 is programmed or being played,
or during random play, the time display
• Press the RANDOM PLAY button.
may show "– –:– –".
The unit automatically selects and
plays tracks at random.
DISPLAY DIMMING
•
If the RANDOM PLAY button is
• Pressing the DISPLAY button deletes
pressed during random play, random
all indicators in the display, only the
play is canceled and normal play
(selected) track indication remains in
starts at the present track.
STOP or PAUSE mode.
•
While running even this track
indication is deleted, leaving only a
small dot in the display as reminder
that the unit is still running.
In that mode if any button (except
PLAY) is pressed, the track is
indicated again for a short moment.
• Pressing the DISPLAY button again
returns to the normal display
indication.
•
Change the time display selection by
repeatedly pressing theTIME button.
AUTO EDIT IS COMPLETED
12/01/1998, 14:47
8