Harman Kardon HD 710 Owner's Manual page 10

All manuals and user guides at all-guides.com
REPEAT PLAY
SEARCH
SEARCHING A SPECIFIC PASSAGE IN
REPEAT ALL TRACKS
PLAY MODE
•
Press and hold down the FORWARD
or BACKWARD SEARCH button
( / ) and release the button
when the desired point has been
reached.
•
If the CD player reaches the end of
the last track during forward search,
the unit switches to the stop mode.
• If the CD player reaches the begin-
ning of a CD during backward search
REPEAT ONE TRACK
in normal play mode, play restarts at
this point.
•
If the CD player reaches the begin-
ning of a track during backward
search in random or programmed play
mode, play restarts at this point.
7
Uden navn-1 10
PROGRAMMED PLAY
You can program up to 20 tracks to play
in any sequence you choose.
•
Press the REPEAT button before or
during play.
If you exceed 20 tracks, the "Full" sign
appears to remind you that the memory is
• appears on the display
REPEAT ALL
full and cannot accept any more tracks.
and all tracks of the CD will be
repeated.
PROGRAMMING
• If the CD player reaches the end of
Example: If you wish to program the
the last track during forward search,
tracks 4, 8 and 17, the programming
the unit goes back to the beginning of
procedure is as follows.
the first track and continues to search
1. In the stop mode, press the PRO-
forward.
GRAM button, the MEMORY light in the
display will start blinking.
• After selecting a desired track with the
DISC
FORWARD or BACKWARD SKIP
button, press the REPEAT button
twice before or during play.
2. Select the desired track with the SKIP
• appears on the display
REPEAT ONE
buttons or NUMERIC buttons on the
and the selected track will be re-
remote.
peated.
•
If the REPEAT button is pressed once
DISC
again in this mode, repeat play mode
is canceled.
3. Press the PROGRAM button. The
TOTAL light and the program number
(1-20) in the display will illuminate.
DISC
4. Repeat steps 2 and 3 to complete
programming.
TRACK INDEX
DISC
STEP
TRACK
DISC
5. Press the PLAY button.
• After the last programmed track has
been played, the last programmed
track number and the total playing time
TRACK MIN SEC
of the programmed tracks are shown
MEMORY
on the display.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 OVER • During program play, if you want
normal play, select the desired track
with the NUMERIC buttons, then
normal play will start that track.
•
If you want program play again, press
TRACK
MEMORY the PROGRAM button in the stop
mode, then the unit switches to the
4
program mode.
TRACK
MEMORY
TOTAL
4
12/01/1998, 14:47
MEMORY
TOTAL
4 9
MEMORY
TOTAL
4 8
17