Thank you for choosing the Harman Kardon HD720 CD player. The HD720 is an exceptionally well-engineered product that offers high performance and ease of use. We ask that you take a few minutes to read through this Owner’s Manual to familiarize yourself with the controls and functions.
Important Safety Information Verify Line Voltage Before Use Your HD720 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard, and may damage the unit.
Cleaning When the unit gets dirty, wipe it with a clean, soft dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immediately with a dry cloth.
HD 720 Power 1 Power Switch 2 Status Mode Indicator 3 Remote Sensor Window 4 Play Button 5 Stop/Clear 6 Pause Button 7 Search Buttons Front Panel Controls RANDOM INTRO REPEAT ALL ONE A AUTO TRACK INDEX fl ± PROGRAM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Play Stop/Clear...
Press the switch again to turn the unit completely off. 2 Status Mode Indicator: When the HD720 is in the ON mode, this indicator will glow green. When the unit has been placed in the Standby mode by pressing the Off button a...
PROGRAM CLEAR Repeat 1/ALL SKIP SEARCH HD 720 Remote Control Functions DISPLAY INTRO CHECK TIME RANDOM a Power Off b Power On c Numeric Controls d Program Button e Clear Button f Repeat 1/All Button g Repeat A–B Button h Skip Buttons i Search Buttons j Play Button k Stop...
(See page 13 for complete information on programming the HD720.) p Intro Button: Press this button to put the HD720 in the Intro Scan mode. When you press the button, the unit will play the first 15 seconds of each track on the disc, and then move to the next track.
Install the two AA batteries supplied with the HD720’s remote by turning the remote over so that you are holding the bottom side up. Press lightly on the embossed...
Normal Play To play a disc, first turn the HD720 on using the . If the Main Power Switch 1 unit has previously been turned on with the Main Power Switch, but then turned off using the remote control, the Status will glow amber.
A third press in order to will return the display to normal level. Time Display The HD720’s time display is capable of showing a wide range of information about a CD. In normal operation the display will show the total running time of a CD after the disc is first put in the unit.
The HD720 is equipped with a variety of functions that make it easy to search for specific parts of any CD. Search If you wish to quickly scan through a disc to locate a particular passage or program, press the...
The HD720’s advanced programming capability enables you to preset the order in which tracks play, to repeat one track or all tracks, and to repeat any portion of a disc without regard to track numbers. Programmed Play To program the order in which the...
A–B the disc will play normally. Auto Play The HD720 may be programmed to auto- Repeat matically go into the play mode when the unit is turned on. To use this feature, insert a disc in the...
• Isolate the unit from vibration by placing it on a firm surface or move it further away from speakers. • Make certain that the HD720 is connected to a line- level audio input, NOT a digital audio or phono input.
Signal Format Sampling Frequency D/A Conversion Oversampling Discrete Analog Output Section Error Correction Frequency Response Total Harmonic Distortion (THD) Dynamic Range Signal-to-Noise Ratio Channel Separation Line Output Level General Power Requirement Power Consumption Dimensions Width Height Depth Weight All features and specifications are subject to change without notice. Technical Specifications 44.1kHz 1-bit, Multilevel Delta-Sigma Conversion...
Page 20
HD 720 fl Power Play Printed in China Part #1111-HD720 CEC6P10068030...