Robertshaw 9600 User Manual page 3

All manuals and user guides at all-guides.com
Installing Item 9600 Thermostat
NOTE: F
OR NEW INSTALLATIONS
. D
ABOVE THE FLOOR O NOT INSTALL BEHIND A DOOR
,
IN DIRECT SUNLIGHT OR NEAR ANY HEAT OR STEAM GENERATING FIXTURES
AT THESE PLACES WILL AFFECT THERMOSTAT OPERATION
1. Turn power off to the heating and cooling systems.
2. Place COOL-OFF-HEAT in OFF position.
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT AUTO - ON
3. Place AUTO–ON switch
into AUTO position.
4. Remove the cover using a coin
or screwdriver.
5. Place thermostat against the wall at desired location. Make sure
wires will feed through opening on base of thermostat.
6. Mark placement of mounting holes (see Figure 3). Set base aside.
Figure 1
,
MOUNT THERMOSTAT ON AN INSIDE WALL
,
IN A CORNER
.
COOL-OFF-HEAT
AUTO - ON
Figure 2
3
, 4-5
FEET
, ,
NEAR AIR VENTS
. I
NSTALLATION