Servicing Fixtures And Tools; Re-Write For Dvd Firmware - Toshiba 19DV550P Service Manual

19-inch diagonal lcd tv/dvd combination

Hide thumbs Also See for 19DV550P:

Service manual (76 pages)

Service manual (38 pages)

Table Of Contents

Table of Contents

JG176 Up-Date Disc

Turn on the power, and set the DVD mode.

Confirm that the "No Disc" will be appeared on the screen.

Press both VOL. DOWN button on the set and Channel button (5) on the remote control for more than 2 seconds.

Press VOL. UP/DOWN button on the unit to check if all the keys on the unit do not function.

NOTE: To check if DVD Write mode is set.

When inserting Up-Date Disc at Non DVD Write mode, the read error will happen.

Insert the Up-Date Disc. (Refer to SERVICING FIXTURE AND TOOLS)

Automatic read will start and "Firmware upgrade Please Wait" will be displayed on the screen.

At this time, the horizontal noise lines may appear. But no problem.

NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon.

Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc.

After the Up-Date, Logo screen will appear.

Unplug the AC cord, then plug it in.

After the write, set to the initializing of shipping.

Turn on the power, and set the DVD mode.

10.

Press both VOL. DOWN button on the set and Channel button (4) on the remote control for more than 2 seconds.

The "INITIALIZE 5 ---> COMPLETE" will appear on the screen.

11.

Then unplug the AC cord, and plug it in.

CHECK FOR THE FIRMWARE VERSION

12.

Turn on the power, and set the DVD mode.

13.

Press both Channel button (1) on the remote control and the STOP button on the set for more than 2 seconds.

Firmware version will be displayed on the top left of the screen.

F/W Ver. ADLSL8811A

Initialize: Complete

Laser drive time

DVD LD: 0Hour

CD LD : 0Hour

When the changed version displays, the Re-write will be completed.

14.

Turn off the power

All manuals and user guides at all-guides.com