Assembling Cart - peerless-AV SS560G Installation And Assembly Manual

Insert right leg (T) into base housing (E) as shown in fi g.1.1. Then line up holes of right leg with holes in bas
1
housing (E). Fasten base housing to right leg using
using 3/16" allen wrench (BB) and
NOTE: Left and right legs can be identifi ed by looking at the cart from the front.
Repeat for left side with left leg (S).
fi g. 1.1
FRONT OF CART
FRONT OF LEG
Insert feet (U) into holes of support legs
2
U
two 3/8-16 x 1.5" bolts (X)
7/32" allen wrench (P) as shown in fi g.1.2.
E
T
(S & T) and hand thread to secure.
S
5 of 41
and two joint connectors (W), tighten
fi g. 1.2
T
ISSUED: 02-25-11 SHEET #: 009-9051-2 09-14-11
W
T
X