OTHER SETTINGS
CONTROLLER LOCK
Holding the setting button will lock the controller in the respective
mode you are in. While your controller is locked, no parameters
may be adjusted nor will you be able to switch modes. Holding
the setting button again will unlock the controller.
HIDE SCREEN
Lock the controller so no settings can be adjusted. Refer to the
setting above. Then press the setting button to turn the display
off. Pressing the setting button again will turn the display back
on. Programs will still run in the background while the LCD
screen is off.
SET MODE PARAMETER TO OFF
Holding the up and down buttons together for 2 seconds will
reset the parameter of the mode you are in to OFF or 0. Pressing
either the up or down button will return the parameter to the
mode's last setting.
FACTORY RESET
Holding the mode, up, and down buttons together for 5 seconds
will reset your controller and restore factory settings. This will
clear all user set parameters in each controller mode and setting.
AUTO INCREASING OR DECREASING
Holding the up or down button will increase or decrease user
setting automatically until the user releases the up or down
button.
42
HOLD +
PRESS +
HOLD +
HOLD +
HOLD +
HOLD +