AC Infinity CLOUDLINE A User Manual page 36

PROGRAMMING
TIMER TO ON MODE
Pressing the up or down button sets a countdown
time. Once the timer ends, the fan will trigger to run
at the speed set in ON mode. If there is a speed set
in OFF mode greater than 0, the fan will run at that
speed during the countdown.
The countdown will begin if no buttons are pressed for
5 seconds. The time left on the countdown is shown
on the bottom left corner of the display. Leaving the
timer mode while the countdown is running will pause
it until you return to this mode.
TIMER TO OFF MODE
Pressing the up or down button sets a countdown
time. The fan will run at the speed set in ON mode
until the countdown ends. If there is a speed set in
OFF mode greater than 0, the fan will run at that
speed at the end of the countdown.
The countdown will begin if no buttons are pressed for
5 seconds. The time left on the countdown is shown
on the bottom left corner of the display. Leaving the
timer mode while the countdown is running will pause
it until you return to this mode.
36
If there is a speed set in OFF Mode
other than zero, the fans will run at
that speed when triggered to turn off.
If there is a speed set in OFF Mode
other than zero, the fans will run at
that speed when triggered to turn off.