Advertisement
Registering a client with VAIO Media
So far we have examined how to use the Network Media Receiver solely in
combination with the television and server (PC VAIO). It is, however,
possible to add another VAIO computer to the wireless network, provided it
is equipped with Wireless Lan 802.11b/g technology and VAIO Media.
To do this, the first thing to do is to connect the client (new VAIO PC) to the
network, which has already been created.
1. Click the Wireless Network Connections icon on the toolbar. A window
opens where you can select the available wireless network.
E.g. MEDIA RECEIVER
2. Enter and confirm the network key. Confirm with Connect.
The system tells us the connection has been made:
Connection to: MEDIA RECEIVER
Signal power: Excellent.
3. Select Register the client with the Server.
4. From Start, All Programs, (Media Sharing), VAIO Media, select VAIO
Server Registration.
A window opens where you can register the Client with the Server.
5. Select Start.
6. Immediately afterwards, run the VAIO Media Setup program on the
server,: repeat the procedure described in Configuring VAIO Media,
followed by step 3, entering Access control settings.
7. Select Peripheral device registration is not necessary in a protected
environment.
8. Then select the Register button.
9. Immediately afterwards select the Start Registration button.
This sets off the registration request. The system tells us it is ready to
add a new peripheral device: Add the peripheral device?
Advertisement
