Advertisement
Multipoint Pairing
Multipoint pairing allows OpenMove to be connected to two devices at once,
allowing users to seamlessly transition between the two.
1. Begin with your headphones powered off.
2. Press and hold volume+ until Audrey says "pairing" and the LED indicator flashes
red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds.
Audrey says "multipoint enabled".
4. Open your first device's Bluetooth
Audrey says "connected".
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says "pairing"
and the LED indicator flashes red and blue.
7. Open your second device's Bluetooth
Audrey says "connected".
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices.
Audrey says "connected" and "device 2 connected".
10.To turn off multipoint pairing: Press and hold the multifunction and volume -
buttons for 3 seconds when pairing. Audrey says"multipoint disabled".
More information: bit.ly/aftershokzpairing
menu and select "OpenMove by AfterShokz."
®
menu and select "OpenMove by AfterShokz."
®
Advertisement
