Advertisement
Multipoint Pairing
Multipoint Pairing allows Aeropex to be connected to two devices,
allowing users to seamlessly transition between the two.
1. Start with your headphones powered off.
2. Press and hold volume+ the LED indicator flashes red and blue.
3. Press and hold the Multifunction Button and Power/Volume+ Button for 3 seconds.
Audrey says "multipoint enabled."
4. Open your first device's Bluetooth
Audrey says "connected".
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding the Power/Volume+ Button
the LED indicator flashes red and blue.
7. Open your second device's Bluetooth
Audrey says "connected."
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices.
10.To turn off the Multipoint Pairing function: Repeat Step 1 and 2. Then press and hold the
Multifunction Button and Volume- Button for 3 seconds until you hear "multipoint disabled."
Moisture Detection Alarm
These headphones can detect liquid such as water, sweat, and rain. If the headphones are
plugged into the charger while wet, the LED indicator will flash red and blue. The headphones will
also vibrate and emit a beep. If this happens, remove the charging cable from the headphones, dry
them completely and then proceed with charging.
menu and select "Aeropex by AfterShokz."
®
menu and select "Aeropex by AfterShokz."
®
08
Advertisement
