Related Manuals for Aftershokz BLUEZ 2
Summary of Contents for Aftershokz BLUEZ 2
- Page 1 BLUEZ 2 WIRELESS BONE CONDUCTION HEADPHONES Parts descriptions • Transducers: Two soft pads, each about the size of a thumbnail, that rest on the cheekbones. The Transducers are housed on both ends of the headphones.
- Page 2 Power Button to turn on the device. When powering on, the headphones will vibrate and Audrey’s voice will prompt with the phrase: “Welcome to Bluez 2”. When powering off, the headphones will vibrate and play four descending beeps, then turn off.
- Page 3 • Warranty Registration Card What’s special? • Bluez 2 are stereo Bluetooth headphones with wireless phone and music functions that rely on bone conduction technology to transmit sound. • The patent-pending OpenFit™ design promises ambient sound awareness and extended comfort that is unmatched with traditional headphones.
- Page 4 How to wear • Begin by holding the headphones horizontally, with the transducer side facing up, closest to your body. Lift the headphones over your head, so the back of the wraparound headband sets in place at the base of the head, and the transducers rest on your cheekbones in front of your ears (not nested inside or covering your ears).
- Page 5 How to use the Adjustable Tension Band 1. Put the headphones on a table horizontally, with the transducer side facing up, closest to your body. 2. Put the Adjustable Tension Band along the interior of the headband. Twist the Adjustable Tension Band to a semicircle, along the inside of the headband, with the pins facing outwards.
- Page 6 If the headphones are out of range (more than 33 feet /10 meters) while connected to a device, Bluez 2 will disconnect from the device, and there will be a single beep every 10 seconds. If the headphones are brought back to the range within three minutes, they will automatically reconnect and you will hear Audrey’s voice prompt with the word, “connected”.
- Page 7 • Charging: Connect Bluez 2 to a standard USB port on your PC or wall charger with the Micro-USB Charging Cable. Bluez 2 will be fully charged within two hours. The LED Indicator will show solid red when charging, and will turn solid blue when the device is fully charged.
- Page 8 Press the button with the dot on the rocker switch to increase the volume, and press the opposite end of the rocker switch to decrease the volume. Note: Volume Control is only valid while Bluez 2 is playing music or in the call.
- Page 9 Specifications Transducer type: bone conduction transducers Transducer sensitivity is 100±3dB Microphone sensitivity is -40±3dB Frequency range is 20Hz~20KHz Rechargeable lithium battery Playback time is up to 6 hours The battery will be fully charged in 2 hours The standby time is up to 10 days Wireless range: 33 feet/10 meters Bluetooth version: 3.0 Compatible Bluetooth profiles: A2DP, AVRCP, HSP, HFP...
- Page 10 How to contact us AfterShokz 6311 Fly Road Suite 106 East Syracuse, NY 13057 sales@aftershokz.com aftershokz.com Note: If you need to return your product for repair, replacement or warranty service, please contact the AfterShokz Customer Support Center at: 1-315-218- 0308 (United States).