Advertisement
ENGLISH
How to Set Up OpenMove
1. Charge
Charge the headphones with the included USB-C charging cable. The LED
indicator will change from red to blue when charging is complete.
2. Pair
Begin with your headphones powered off. Enter pairing mode by pressing
and holding volume+ until Audrey says "pairing" and the LED indicator
flashes red and blue.
3. Connect
Open your device's Bluetooth
menu and select "OpenMove by
®
AfterShokz." Audrey will say "connected" and the LED indicator will flash
blue one time.
Let us take care of you! Protect your headphones against defects.
Make sure to register your OpenMove at
Aftershokz.com
Advertisement
