SIP SPEEDO-REVCOUNTER 2.0 Instructions Manual page 31

FUNCTION SETTING INSTRUCTIONS
The setting is changed from 14:00 to 14:05.
Hold the button down for 3 seconds to return to
the ADJ 5 menu.
Press button once to enter the ADJ 6 menu
(backlight brightness).
Backlight brightness
E.g.: We would like to change the brightness to
5-5(100% brightness).
Hold the button down for 3 seconds to enter the
backlight brightness setting.
Press button once to choose the setting number.
NOTE!
Setting range: The backlight is adjustable
in 5 steps: 1-5(dark),5-5(bright).
With each step,the brightness will be
increased by 20%.
The setting is changed from 3-5 to 5-5.
Hold the button down for 3 seconds to return to the
ADJ 6 menu.
Press button once to enter the ADJ 7 menu
(total mileage).
Total mileage
E.g.: Now the total mileage is 12,500 km.
Press button once to enter the ADJ 8 menu
(adjustable mileage).
NOTE!
Adjustable mileage
E.g.: You want to set the adjustable mileage at
5,000 km.
Hold the button down for 3 seconds to enter the
adjustable mileage setting.
ADJ 7 is for display only the total mileage.
An adjustment is possible in ADJ 8.