Motorola Commercial Series Basic Service Manual page 69

Specifications
Specification
Frequency Stability:
Modulation Limiting:
Current Drain Transmit:
FM Hum and Noise:
Conducted/Radiated
Emissions:
Adjacent Channel Power
Audio Response:
( 300 to 3000Hz)
Audio Distortion:
@ 1000 Hz, 60%
Rated Maximum Deviation:
Specification
Sensitivity (12dBSINAD):
(ETS)
Intermodulation : (ETS)
Adjacent Channel
Selectivity: (ETS)
Spurious Rejection: (ETS)
Rated Audio: (ETS)
(Extended audio with
4 Ohm speaker)
Audio Distortion @ Rated
Audio:
Hum and Noise:
Audio Response:
( 300 to 3000Hz)
Conducted Spurious
Emission per FCC Part 15:
Transmitter
VHF1 VHF2
+/- 2.5ppm
7A (25W)
-40 dB@12.5 kHz
-45 dB@ 20/25 kHz
-60dB @12.5,
-70dB @ 20/25kHz
Receiver
VHF1 VHF2
µ
0.35
75 dB @ 25 kHz
65 dB @ 12.5 kHz
75 dB
-40 dB @ 12.5 kHz
-45 dB @ 20/25 kHz
UHF1
±2.5 kHz @ 12.5 kHz
±4.0 kHz @ 20 kHz
±5.0 kHz @ 20/25 kHz
-35 dB@12.5 kHz
-40 dB@ 20/25 kHz
-36 dBm < 1 GHz
-30 dBm > 1 GHz
+1, -3dB
3% Typical
UHF1
µ
V (12.5kHz) 0.30 V (25kHz) Typical
>65 dB
60 dB @ 12.5 kHz
4W Internal , 13W External
3% Typical
-35 dB @ 12.5 kHz
-40 dB @ 20/25 kHz
+1, -3dB
-57 dBm <1 GHz
-47 dBm >1 GHz
UHF2 Midband
+/- 5ppm
8A (25W)
-40 dB@12.5 kHz
-45 dB@ 20/25 kHz
UHF2 Midband
70 dB @ 25 kHz
70 dB
-40 dB @ 12.5 kHz
-45 dB @ 20/25 kHz
7-11