Motorola Commercial Series Basic Service Manual page 41

RF Test Mode (5-Tone Radios)
8. In this mode all buttons, when pressed and held, will emit a high pitched beep and another
when the button is released to verify button functionality.
9. Pressing P2 for at least one second will return the user to RF Test Mode
Note: The radio powers up on the last used test state i.e. the last used test environment, test
channel, and channel spacing.
No. of Code 'TT'
Beeps CM360
1 SQ
(high pitch)
11 CP
12 LL
5 US
2 DP
1 TP
3 DT
9 M0
10 M1
4 M3
6 SC
7 SZ
8 EX
13 BS
Table 3-2 Test Environments
Description
Carrier Squelch
(CSQ)
CMP
LLE
Unsquelch
(UNSQ)
Digital
Private-Line (DPL)
Tone
Private-Line (TPL)
Dual-Tone multiple
frequency (DTMF)
MPT 0
MPT 1
MPT 3
Select 5 CCIR
(SV-C)
Select 5 ZVEI
(SV-Z)
Data Mode
(EXT)
Base Station Mode
(B-ST)
RX: unsquelch if carrier detected
TX: mic audio
RX: constant unsquelch
TX: mic audio
RX: constant unsquelch
TX: mic audio
RX: constant unsquelch
TX: mic audio
RX: unsquelch if carrier and digital code (131) detected
TX: mic audio + digital code (131)
RX: unsquelch if carrier and tone (192.8Hz) detected
TX: mic audio + tone (192.8Hz)
RX: unsquelch if carrier detected
TX: selected DTMF tone pair
RX: unsquelch if carrier detected
TX: 1200 baud with data "0"
RX: unsquelch if carrier detected
TX: 1200 baud with data "1"
RX: speaker muted, high tone sounds when below
sequence detected
TX: 1200 baud with bit pattern
"aa aa c4 d7 d2 90 49 f1 f1 bb f5 c7"
RX: speaker muted, high tone sounds when below
sequence detected
TX: CCIR sequence 1124, 1275, 1446, 1640, 1860 Hz
RX: speaker muted, high tone sounds when below
sequence detected
TX: CCIR sequence 1060, 1270, 1530, 1830, 2200 Hz
RX: unsquelch if carrier detected
TX: flat TX audio
RX: constant unsquelch
TX: mic audio
Function
3-3