Setting Bass Forward; Defeat; Switching The Tuner Mode - Alpine cda-7873 Owner's Manual

Basic Operation
g DN
f UP

Setting Bass Forward

The Bass Forward function shifts the low
frequency's energy component to the front. This
moves the high energy, dynamic bass sound to
the front sound stage.
1
Press the B-FWD button to activate the Bass
Forward setting mode.
2
Press the g DN button or f UP button to
select the Bass Forward level.
OFF ← → 1 ← → 2 ← → 3
(Less ← .... → More)
NOTE
If no buttons are pressed within 5 seconds, the setup
menu returns to the normal audio display.

Defeat

By setting Defeat ON, all previously adjusted
settings will return to the factory defaults.
1
Press the DEFEAT button for more than 3
seconds to turn Defeat on.
To cancel Defeat, press the DEFEAT button
again for more than 3 seconds.
10
-EN
DISP/B.OUT
B-FWD/DEFEAT SETUP
BAND

Switching the Tuner Mode

The CDA-7977/CDA-7876/CDA-7875/CDA-7873
incorporates the MAX TUNE SQ for the highest
quality tuner audio. Moreover, you can choose
between two settings to suit your own personal
sound preferences and usage.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP button repeatedly to select
"NORMAL or HI-FI." Each press of the f UP
button changes the modes as shown:
→ NORMAL/HI-FI → AMBER* → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ←BEEP ←
∗ CDA-7876 Only
NOTE
If you press the g DN button the display scrolls in
reverse sequence.
3
Press the TUNE button to switch the TUNER
mode.
HI-FI ← → NORMAL
NORMAL: Standard setting
HI-FI: Sound quality priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to
the tuner in the HI-FI mode, we recommend you
change to the NORMAL mode.
4
When the setting is completed, press the SETUP
button to return to the normal mode.