Your First Session With The Nanoverb; Unpacking And Inspection; Basic Connections; Powering Up - Alesis NanoVerb Stereo Amplifier Reference Manual

Alesis reference manual stereo amplifier
Table of Contents

Advertisement

Y
F
OUR

Unpacking and Inspection

Your NanoVerb was packed carefully at the factory, and the shipping carton was
designed to protect the unit during shipping. Please retain this container in the highly
unlikely event that you need to return the NanoVerb for servicing.
The shipping carton should contain the following items:
This instruction manual
Alesis NanoVerb with the same serial number as shown on shipping carton
AC Power Supply Adapter (Alesis P3)
NanoVerb Quick Guide/Program Chart
Alesis warranty card
It is important to register your purchase; if you have not already filled out your
J
warranty card and mailed it back to Alesis, please take the time to do so now.

Basic Connections

The NanoVerb will work in many different applications, whether you are connecting
an instrument directly into it, or connecting it with a mixing console. Briefly described
here are the basic connections to get you up and running quickly. For more
information on connections, please refer to Chapter 2.
Mono In, Mono or Stereo Out. Connect a 1/4" phone cord to the [LEFT/MONO]
INPUT of the NanoVerb from a mono source. (The Left input will then feed both
inputs.) Connect another 1/4" phone cord from the [LEFT] OUTPUT of the
NanoVerb to an amplification system or mixer input. Additionally, you could
connect a second 1/4" phone cord to the [RIGHT] OUTPUT for use with a stereo
amplification system, or two mixer inputs.
Stereo. Connect two 1/4" phone cords to the [LEFT/MONO] & [RIGHT ] INPUTS
of the NanoVerb from a stereo source , and two 1/4" phone cords from the
[LEFT/MONO] & [RIGHT] OUTPUTS of the NanoVerb to a stereo amplification
system or two mixer inputs.
If connecting to a mixing console's aux sends/returns, you will want to turn the [MIX]
knob fully clockwise so that the NanoVerb outputs only wet (effected) signal.

Powering Up

After making your connections, turn on the system's power using this procedure:
NanoVerb Reference Manual
Your First Session with the NanoVerb– Chapter 1
C
HAPTER
S
IRST
ESSION WITH THE
N
V
ANO
FROM INSTRUMENT OR EFFECTS SEND
RIGHT INPUT
LEFT INPUT
1
ERB
LEFT OUTPUT
RIGHT OUTPUT
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents