Page 1
Please read these instructions in their entirety before attempting to use this product. The pumps used with the Coralife 75G, 150G and 300G Cone Skimmers are listed by Underwriters Laboratories to ensure that they meet the stringent U.S. and Canadian safety requirements.
Page 2
To guard against injury, the following basic safety precautions should be observed when operating the unit. Collection Cup Drain Tubing 1. Never connect the Coralife Cone Skimmer to any power source while (0.25" I.D.) hands are wet. 2. Always unplug the unit from outlet or power source before installing,...
INSTALLATION SETUP FRONT VIEW IN-SUMP INSTALLATION SETUP NOTE: Saltwater may need to be added to the aquarium to replace water used by the Cone Skimmer. Collection Cup Assembly 1. Locate desired area to place Skimmer. 2. Attach Venturi Air Inlet to Skimmer Intake. (4.0) 3.
OPERATION TOP VIEW PRE-OPERATION Turn Water-Level Adjustment Dial to adjust water level 1. Make sure that all tubing connections are tightly secured. Air Silencer Control Valves 2. Verify that Collection Cup and Lid are tightly fastened and sealed to the Main Chamber. 3.
MAINTENANCE TROUBLESHOOTING MAINTENANCE NOTE: Variables that affect skimming to produce dry or wet foam are: SAFETY: Always disconnect needle-wheel pump from power a. New Fish or Invertebrates supply before removing collection cup or cleaning unit. b. Frequent Feeding WARNING: Only clean with warm fresh water. Do not use any type of chemical cleaning agent to clean the skimmer.
Page 7
12 Month Limited Warranty WHAT THE WARRANTY COVERS: Central Aquatics (Company) warrants this Coralife product (see Exclusions below) to the original purchaser against defective material and workmanship that occurs during normal in-home use for 12 months from date of purchase. Company will, at Company’s option, either repair or replace same without charge (but no cash refunds will be made).
Need help?
Do you have a question about the 75G and is the answer not in the manual?
Questions and answers