Summary of Contents for Coralife BioCube 100103194
Page 1
Hinged-Top Canopy Instructions Please read these instructions in their entirety before attempting to use this product. For questions or inquiries about this product, please visit us online at coralife.com or call 888-255-4527...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INFORMATION: Please read the following precautions before use! WARNING - To guard against injury, basic safety precautions should be observed 1. To reduce the risk of electric shock, always unplug the pump and power cords before performing including the following: any maintenance.
Product Specification Assembly Operation Removing BioCube Canopy Cooling Fan ® LED BioCube ® Hood Fits Coralife ® BioCube ® Sizes 14 and 16 1. Unplug BioCube Canopy. 1. Make sure that the cooling fan is on ® Item No. 100103194 and blowing across the unit.
Timer Instructions Attention: Reset Instructions Unit may need to be reset after extended periods without power. After plugging in the unit, insert the point of a paper clip or pen into the RESET pinhole in the center of the control panel.
This warranty will not be effective unless and until the Coralife product is shown to have been used in accordance with the safety and installation instructions accompanying the product, including the requirement that the product be placed on a flat, level surface designed to support the product.
Need help?
Do you have a question about the BioCube 100103194 and is the answer not in the manual?
Questions and answers