Page 1
Instructions (see page 11 for Aqueon BlueIQ™ ® details) Please read these instructions Owner’s For questions or inquiries about in their entirety before attempting this product, please visit us online at Manual to use this product. coralife.com or call 888-255-4527...
IMPORTANT SAFETY INSTRUCTIONS WARNING – To guard against injury, basic safety precautions should be observed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. DANGER – To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment.
Page 3
IMPORTANT SAFETY INFORMATION: Please read the following precautions before use! To reduce the risk of electric shock, always unplug the pump and power cords before performing any maintenance. Do not submerse canopy. 2. Never allow small children to touch, climb-on, or play with the aquarium or its stand. Adult supervision is required.
PARTS IDENTIFICATION Part # Item Description Hinge Pins (2) Canopy Feeding Door Cooling Fan Light Lens Cover Filter Cartridge Output Discharge Nozzle Flexible 0.5" I.D. Tubing Media Tray Water Pump Sponge Filter Glass Aquarium PRODUCT SPECIFICATION Smart BioCube Size 14 ®...
Page 6
ASSEMBLY Safety Precautions: Overflow Tray Do not plug Smart BioCube Jr aquarium ® into an outlet or power source until setup and installation is completed. 2. Visually inspect the aquarium and canopy Media Tray prior to installation to make sure it has not been damaged.
OPERATION Cooling Fan Wet/Dry Filter Start-Up Operation Make sure that the cooling fan is on and Open canopy and remove filter cartridge. blowing across the unit. Rinse thoroughly with cool freshwater and reinstall in 1st chamber. FIGURE 4 2. Rinse substrate, sand, gravel, rocks, Cooling Fan Air driftwood, plants and ornaments and add Discharge...
Page 8
WET/DRY FILTRATION OPERATION Wet/Dry Filtration Step 4: Observe and make sure that the water Water goes through the sponge filter into circulation is flowing properly from the the water pump. aquarium section through the wet/dry FIGURE 10 section. Step 1: Water proceeds into surface and bottom intake.
MAINTENANCE WARNING! Monthly Maintenance Make sure LEDs are turned off and unplug Remove used filter cartridge and discard power cords from power source or outlet (Figure 13). Replace with new cartridge. before performing any maintenance. Note: Make sure to rinse new filter cartridge with cool freshwater before Daily Maintenance installing inside Smart BioCube...
Page 10
MAINTENANCE 3. Disconnect water pump assembly from 4. Disassemble pump and impeller. Rinse and output elbow attachment and detach wipe down all parts to dislodge debris and pump from flexible tubing (Figure 14). particulate matter (Figure 15). Note: FIGURE 14 If calcium buildup is present, soak in a vinegar solution with 1 part vinegar:1 part Flexible Tubing...
Aqueon BlueIQ™ ® TO PAIR YOUR DEVICE FACTORY RESET Pairing your fixture using Wi-Fi will give you If your fixture is not able to pair to your all light and scheduling features after account mobile device or you want to pair to a BlueIQ™...
This warranty will not be effective unless and until the Coralife product is shown to have been used in accordance with the safety and installation instructions accompanying the product, including the requirement that the product be placed on a flat, level surface designed to support the product.
Need help?
Do you have a question about the Smart BioCube Jr and is the answer not in the manual?
Questions and answers