AGFA 307 Owner's Manual page 32

Chapter 1 Basic operation
4. Close the slot/SCSI connector cover and slide the main switch to
ON.
Initial loading starts when the main switch is turned on. The card is
scanned and the recording head moves to the first available space on
the PC card. While loading, the frame counter will cycle as shown.
When loading is complete, the standby display will appear showing
the number of frames remaining.
To display the maximum capacity of the PC card
While pressing the mode button, press the self timer button.
• The maximum capacity of the card will appear at the top center of
the data panel.
• When the buttons are released, the card capacity will no longer be
displayed.
Inserting the PC Card