5. Charging station for battery
operation
Fig 2: Charging station for eMultiCheck
1.1 Starting up
Before the device is used for the first time, it should be fully charged in order to ensure a maximum
battery life. To do this, just push the eMultiCheck into the charging station. An indexing system on both
parts ensures that it can only be pushed in the right way round. The first time, the charging time should
be at least one hour. The device is then fully operational.
To remove from the charging station, hold the station tight and pull out the eMultiCheck.
Fig 3: Charging the eMultiCheck (for battery operation)
3