Download Print this page

Advertisement

Quick Links

K
oxfordshire
dresser
Important: Keep for future
reference. Read carefully
Instruction Manual

Advertisement

loading

Summary of Contents for Kiddicare Oxfordshire

  • Page 1 Important: Keep for future reference. Read carefully Instruction Manual...
  • Page 2 parts x 2 (L & R) x 2 (L & R) x 2 (L & R) x 2 (1 each L & R) x 2 (1 each L & R)
  • Page 3 hardware x 16 15mm x 22 35mm x 4 40mm x 6 20mm x 4 30mm x 6 25mm x 4 30mm x 4 20mm x 2 27mm x 2 17mm x 16 35mm x 8 Tools required flat-bladed cross-point hexagon key screwdriver screwdriver...
  • Page 4 assembly each side (L&R) (1 left & 1 right) (L & R) Repeat for other side.
  • Page 5 assembly Insert fittings 5 with arrowed slot pointing toward part A. Once assembled, use a large screwdriver to give 1/2 turn clockwise to lock. Insert fittings 5 with arrowed slot pointing toward part A. Once assembled, use a large screwdriver to give 1/2 turn clockwise to lock.
  • Page 6 assembly...
  • Page 7 assembly x 11 (each part B) (L & R) 25mm x 2...
  • Page 8 assembly 20mm x 2 Insert with slot pointing toward the edge as shown (each side) Wheel at rear (each side)
  • Page 9 assembly Repeat for second door. 1. The narrow part of the front Once the dresser is in position, screw fits into the slot in the metal use the screws on the hinges to plate on the dresser door. adjust the fit of the doors. Loosen the back screw first.
  • Page 10 assembly 35mm x 2 each side Do not fully tighten the fittings until the frame is located on the dresser. Insert fittings 5 with arrowed slot pointing toward part O. Once assembled, use a large screwdriver to give 1/2 turn clockwise to lock. 35mm x 4 each side...
  • Page 11 assembly The dresser is supplied with a fixing kit which will secure it and help to guard against accidental tipping. WARNING : Installation only to be carried out by a competent person. Check the suitability of the wall before fitting. Screw (15mm) Screw (25mm) Washer x 2...
  • Page 12: Maintenance

    safety WARNING: Do not leave your child unattended. ! All assembly fixings should always be tightened properly. Care should be taken that no screws are loose because a child could trap parts of their body, or clothing (e.g. strings, necklaces, ribbons, dummies, etc.) which could pose a risk of strangulation. ! Be aware of the risks of open fires and other such sources of strong heat, such as electric bar fires, gas fires, etc.
  • Page 13 kiddicare...
  • Page 14 Customer Care: hello@kiddicare.com 06_18...