Page 1
Important: Keep for future reference. Read carefully Instruction Manual...
Page 2
parts x 2 (L & R) x 4 (2 each L & R) x 2 (L & R)
Page 3
hardware x 20 x 20 x 22 30mm x 4 45mm x 6 35mm x 12 Tools required flat-bladed cross-point hexagon key screwdriver screwdriver Measure (millimeters)
Page 6
assembly NOTE: Slot at top x 10 (each panel) (each side) Repeat for second drawer wheel at rear...
Page 7
assembly Repeat for second drawer completed drawer...
Page 8
assembly (x 2) Insert fittings 5 with arrowed slot pointing toward the edge of parts O and P. Once assembled, use a large screwdriver to give 1/2 turn clockwise to lock.
Page 10
assembly The dresser is supplied with a fixing kit which will secure it and help to guard against accidental tipping. WARNING : Installation only to be carried out by a competent person. Check the suitability of the wall before fitting. Screw (15mm) Screw (25mm) Washer x 2...
safety WARNING: Do not leave your child unattended. ! All assembly fixings should always be tightened properly. Care should be taken that no screws are loose because a child could trap parts of their body, or clothing (e.g. strings, necklaces, ribbons, dummies, etc.) which could pose a risk of strangulation. ! Be aware of the risks of open fires and other such sources of strong heat, such as electric bar fires, gas fires, etc.
Page 12
Kiddicare Club Way Cygnet Park kiddicare Hampton Peterborough Cambridgeshire PE7 8JA Customer Care: hello@kiddicare.com 11/13...