Advertisement
TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
NOTE:
when
adjust white balance,please do not change the data of the
BLACK G
,only adjust the other two:
x=280,y=290
We suggest adjust
Out going Setting
3
Outgoing setting, please keep the defaults setting but the special requirements.
Press Left/Righ key and waiting for about 5 seconds until "OK" displayed, which means the set
finish the initialization.
Please remember to do this when outgoing factory.
6 In System Programme for MS19 Chassis
Equipment required as follow:
Connecting board and VGA line as illustrated: Using Standard Parallel lines connects to PC via
Parallel socket, and VGA line connects to TV set via VGA Socket.
Notes: Please make sure Pin12 and Pin 15 of VGA line should
Connects to PC
Chassis Name
Issued on
Updated on
not
be NG.
Connects to TV set
Serial No.
Page
Version
WHITE G
and
Advertisement
