Advertisement
TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
When aging the set, please setting "WARM UP STATUS" at "ON" in
and enter "SET UP" menu to set.
Setting "Power Mode" at ON if need power on directly.
Setting "Power Mode" at STB if need aging the set in standby status.
5 Production Adjusting Item
ADC adjustment
1
The chassis can execute ADC auto-tune if in YPbPr / PC sourcing.
Enter Factory Menu, select YPbPr / PC in Source item, then select AUTOTUNE in ADC ADJ,
press V+ to run, waiting for about 5 seconds until "OK" displayed, which means the set finish
the ADC adjustment, and quit.
YPbPr sourcing, please apply
PC sourcing, please apply
Remark: Please make sure ADC adjustment have done successfully before White
balance adjustment.
White Balance adjustment
2
Please adjust the NORMAL, WARM, COOL temperature in White balance according to
company regular.
Please make sure ADC adjustment have done successfully before White balance adjustment,
and select the picture mode at "NATURAL".
White balance adjustment should under three different sourcing:
AV/TV/SVIDEO sourcing reunification under the AV adjustment:
please apply
NTSC-M system 8-scale grey pattern
YPbPr/HDMI sourcing reunification under the YPbPr adjustment:
please apply
16-scale grey pattern
PC sourcing should adjust singly
please apply
16-scale grey pattern
TCL factory can adjust white balance according to
If need manual adjustment, please operate in
Chassis Name
Issued on
Updated on
100
color bar pattern
16-scale grey pattern
actory working instruction and
WB
page in factory menu.
Serial No.
Page
Version
PRODUCTION
menu,
tools.
Advertisement
