Using Snmp - Axis 1610 User Manual

AXIS 1610 User's Manual

Using SNMP

General Information
Section 4: Management & Configuration
You can use SNMP (Simple Network Management Protocol) for
remotely monitoring and configuring the AXIS 1610. All major
functions for print servers are supported.
SNMP refers to a set of standards for network management,
including a protocol, a database structure specification, and a set
of data objects. The AXIS 1610 SNMP implementation runs in
TCP/IP networks.
The management is handled by NMS (Network Management
System) software running on a host on your network. The NMS
software communicates with network devices by the means of
messages, which are references to one or more objects.
A message can be a question or an instruction to a device, or an
alarm triggered by a specific event in a device. Objects are
contained in data bases called MIBs (Management Information
Base), where MIB-II is a standard database.
The AXIS 1610 supports the following MIBs:
• relevant parts of MIB-II
• AXIS MIB
• relevant parts of the Host Resource MIB
• relevant parts of the Printer MIB
• relevant parts of the CANON-MIB
47