Using Snmp - Axis 5400 User Manual

AXIS 5400/AXIS 5600 User's Guide Management and Configuration
27

Using SNMP

You can use SNMP (Simple Network Management Protocol) for remote monitoring
and configuration of the AXIS 5400/AXIS 5600. All major functions applicable to
print servers are supported.
The AXIS 5400/AXIS 5600 supports all relevant parts of MIB-II and the host
resource MIB. It also includes a private enterprise MIB called AXIS MIB. To make
the full use of the SNMP support you must have an SNMP tool that allows you to
install private enterprise MIBs.
The AXIS MIB can be downloaded from:
• the /software/prt_srv/utility/mib/1_14 folder on the AXIS Online CD.
• the Axis WWW home page at http://www.axis.com/.
• the AXIS 5400/AXIS 5600 using FTP.
Follow these steps to add the AXIS MIB to your SNMP software:
1. Log in to the AXIS 5400/AXIS 5600 using FTP.
2. Download the MIB file /snmp/axis.mib to the SNMP host.
3. Install the AXIS MIB according to instructions in your SNMP software
documentation.