Stabilizer Assembly - Sealey SSCL1.V2 Quick Start Manual

Platform scaffold tower en 1004, tower extension pack 3, tower extension pack 4

7.1.1.

Place the '2-rung' ladder onto the '7-rung' ladder and pre-assemble the diagonals as shown in the diagrams below (fig.16).

fig.16

7.1.2.

Install the boosters on the base of the scaffolding and assemble the lower diagonal attachments. Replace the 4 pins on the bottom of

the booster so that they can be locked into the base.

8. STABILIZER ASSEMBLY

8.1.

Installation of stabilisers fastened to the uprights by means of two wing nut clamps (fig.17):

fig.17

Original Language Version

SSCL1.V2, SSCL3, SSCL4 Issue:4 28/06/21

Table of Contents

Sscl3 Sscl4