Vidyo VidyoRoom HD-220 Getting Started page 2

VidyoConferencing System Setup
TM
The VidyoRoom Hardware
Adapter, Adapter, Adapter,
Display Port/DVI
TM
3.
Primary & Secondary
Display
5.
Audio Device
Chat 150 Chat 150
Konftel 300 Konftel 300
Yamaha PJP-20UR
Use only one audio device
between the above
Front
VGA2USB (optional)
Start Up Screens
*
Upon bootup you see the Accounts settings screen:
1.
Enter Portal – Arrow right, click and use the
ƒ ƒ
onscreen keyboard to enter the IP address of the
VidyoPortal that the VidyoRoom is connected to.
Enter Name — Arrow down to the Name fi eld, click
ƒ ƒ
and use the onscreen keyboard to enter the
name of the VidyoPortal.
Enter Password — Arrow down to the Password fi eld,
ƒ ƒ
click and use the onscreen keyboard to enter
the password of the VidyoPortal.
Scroll down to the Save button and press
ƒ ƒ
save your settings
* See separate VIdyoRoom User Guide and included CD-ROM for more details.
All manuals and user guides at all-guides.com
SECONDARY PRIMARY
CAMERA
OR
OR
Back
2.
To change network settings for your VidyoRoom,
ƒ ƒ
arrow down to Network. The default setting is Use
DHCP.
ƒ ƒ Set to Use static IP address and specify network
settings, using the onscreen keyboard to enter
appropriate information, then scroll down and press
on the Save button.
to
4.
Video Device
NOTE: Stands must be used when placing the unit
DVI/DVI
for Sony
vertically. See photo on the front page.
DVI/HDMI
Do not power on HD-220 unit until Display(s) and Camera are fully
for Minrray
connected and powered on.
Sony EVI-HD7V
(1080p@30fps)
1. Connect Power cable.
Preferred
2. Connect Ethernet cable to ETH-0 and to your
OR
network.
Sony EVI-HD3V
(720p@60fps)
2.
Ethernet
3. Connect the TV using HDMI/DVI cable to DVI Display
dongle and then connect to an available display port.
OR OR
* Repeat for the secondary display
4. Connect camera:
Minrray HDCAM90-S-VY
* For video connection use DVI/DVI cable for Sony
(1080p@30fps)
* For Camera Control connection:
4a.
VISCA
5. Connect USB SpeakerPhone cable to an available
4c.
DB9-CONNECTION
4b. USB port.
USB TO SERIAL
1.
Power
Using the Onscreen Keyboard
ƒ ƒ
ƒ ƒ
ƒ ƒ
ƒ ƒ
or DVI/HDMI cable for Minrray
a. Connect VISCA cable to camera
b. Connect VISCA cable to USB/Serial DB9 cable
c. Connect USB/Serial DB9 cable to the CAM CTRL port on
the unit
In a fi eld, click to view the keyboard.
Use up and down, left and right arrow keys
to navigate.
Click to enter a character.
Select Done to close the onscreen keyboard