Bluetooth Settings - Canon SELPHY ES3 CDP-E063-010 User Manual

Bluetooth Settings

Device name
Security
Passkey
Deny Access
Reset
1
Press
2
Select [Bluetooth] and press
• The Bluetooth setting screen is displayed.
3
Press or
or to change the setting value.
4
Press
• The setting value is saved and the screen returns to [Printer Setup].
1
• For how to use the menu (Printer Setup), refer to page 99.
• For how to print using a Bluetooth unit, refer to Printing via Bluetooth (p. 77).
Selects a name from Canon ES3-1 (
used when the target device (this printer) is selected from the mobile
phone. This setting distinguishes this device when there are two or
more Bluetooth-enabled devices capable of communication.
Selects either [On] or [Off] (
printer and mobile phone must be entered when connecting to the
printer.
The passkey refers to an identification number to be determined. It is
used to prevent incorrect access from other Bluetooth devices. When
[Security] is set to [On], press
enter on the mobile phone to enable printing. The default passkey is
"0000".
Selects either [On] or [Off] (
and printing from Bluetooth devices.
Reset Bluetooth settings to their defaults.
to select [Printer Setup].
to select the item you wish to set and press
.
) to ES3-9. This is the name
). When set to [On], the passkey for the
and set the key (4-digit number) to
). Selecting [On] will disable searching
.
Make Printer Settings
,
Appendix
101