TdA DC535Y User Manual page 6

DC535Y/DCZ535Y, DC655Y/DCZ655Y BOOM GATE USER'S MANUAL
Boom gate (see Fig.5)
Place the boom gate back into position, mount the boom gate to the concrete pad with washers and
nuts.
Bar (see Fig.6)
Mount the bar to the assembled cubicle and lock it with the four M10×16 socket head screws.
Mount the bar cover using the three M4×5 screws.
Manual operation (see Fig.6)
In case of power failure use crank to open or close boom gate manually, use the crank as follow:
⚫
Shut off the main power of the boom gate. This safety measure is mandatory to avoid any risk of
injury in case of accidental running of the motor.
⚫
Insert the crank in the opening of the housing (protected by a cover).
Fig.4
Fig.5
6