PARTS AND DISPLAY INDICATORS
SETUP AND OPERATING PROCEDURES
Download The Free iHealth ECG3 App
Prior to first use, download and install the iHealth ECG3 App from the App Store (iOS
device). Use keyword search terms "iHealth" or "ECG3".
Note: The iHealth ECG3 App is only supported in iPad mini 4, iPad Air 2, iPad mini 3,
iPad Air, iPad mini 2, iPad mini and iPad(4th generation) .The system version should be
above 10.0.0.
Add new user item in iHealth ECG3 App
User need to add a new user item in iHealth ECG3 App to store the measuring history.
Do the following steps to create a new user item:
a. Press the
b. Click the "Add" button at the bottom of this page to enter the "Add User" page. Input
the information of the patient according to the prompt.
c. Click the "Save" button to save the new user item.
Activate the ECG3
ECG3 should be activated on first use, or you will not be able to use this unit.
Connecting ECG3 to an AC adapter or a USB port on PC using the charging cable, the
green indicator LED on the ECG3 begins to blink. Disconnecting ECG3 with charging cable,
the green indicator LED blinks 4 times indicating that the device has been activated.
Update the firmware of ECG3
If a new version of the ECG3's firmware is released, the iHealth ECG3 App will inform
user to update when the ECG3 is connected to the iOS device with the data cable. User
can choose whether to update this version of the ECG3's firmware, but it is strongly
recommended to do this updating to get a better experience. Do the following steps to
update the firmware of ECG3:
a. Connect ECG3 to the iOS device with the data
cable and launch the iHealth ECG3 App. If there is
User key
Indicator LED
Electrode B side
button to get into the user list.
Base
Electrode
Contracts
Electrode A side
3