Owner's Manual; Introduction; Package Contents; Intended Use - iHealth ECG3 Owner's Manual

INTRODUCTION

Thank you for selecting the ECG3. The ECG3 is an automatic single - lead dynamic
electrocardiogram (ECG) recorder, which can record and store 72 hour ECG data at most.
ECG3 can transmit current ECG data to an iOS device with Bluetooth on which user can
watch the current ECG waveform and heart rate. The ECG data stored in ECG3 can be
uploaded on an iOS device with a data cable, which will be automatically analyzed and
displayed. The heart rate is calculated by counting the heart beats in each 30s and the
maximum and minimum heart rate is calculated in every hour.

PACKAGE CONTENTS

· 1 ECG Recorder
· 1 Owner's Manual
· 3 Electrodes
· 1 Data cable
· 1 Charging cable
Cable
DC Power Line (USB Cable)
Signal Line (USB Cable)

INTENDED USE

The ECG3 is intended for use in a community hospital or at home and it is a dynamic
electrocardiogram measurement system. It is designed to measure and record ECG data
of an adult individual in the long term by using a technique in which an electrode was
pasted on the chest.

CONTRAINDICATION

People wearing a cardiac pacemaker should not use this product.
People with sensitive skin or skin allergies are not suggested to use this product.
Max. cable length,
Shielded/unshielded
0.26m Unshielded
0.26m Unshielded
Number Cable classification
1Set DC Power
1Set Data transition
2