Download Print this page
Rane HAL1 Series Manual

Rane HAL1 Series Manual

Multiprocessor
Hide thumbs Also See for HAL1 Series:

Advertisement

Quick Links

1
2
3
4
OVERLOAD
SIGNAL
MIC / LINE INPUTS
1
2
3
4
OVERLOAD
SIGNAL
LINE OUTPUTS
HAL1x Multiprocessor
1
2
IN
OUT
IN
OVERLOAD
REMOTE
1
2
1
2
1
2
AUDIO
SIGNAL
1
2
1
2
1
2
DEVICES
ENABLED
EXP1x Remote Audio Expansion for the HAL1x
1
2
3
4
OVERLOAD
SIGNAL
LINE OUTPUTS
EXP3x Zone Output Expansion for the HAL1x
1
2
3
4
OVERLOAD
SIGNAL
EXP5x Input Expansion for the HAL1x
EXP7x AEC Expansion for the HAL1x
General Description
HAL is more than just another DSP drag-and-drop system. It has
revolutionized system design and installation.
HAL is an expert in room combining, paging and distributed
audio systems. This groundbreaking architecture is dimensions
beyond any other solution. HAL easily guides even novice us-
ers through what used to be complex tasks in just minutes. No
intricate matrix mixing or presets are required for room combin-
ing and paging. No virtual wiring required to distribute pages and
background music to multiple zones.
Seamlessly interface HAL to your application with a broad
variety of peripheral devices including smart Digital Remotes, Re-
mote Audio Devices (RADs), portable or rack automixers, audio
I/O and logic expansion devices, wall sensors, ambient sensing
mics, small remote amplifiers, and an advanced Paging Station.
In addition, the HAL Multiprocessor and Halogen™ software
check the status, location, CAT 5 wiring integrity, and that audio
is flowing in all peripheral devices, so you know your system is
properly connected and ready to go.
HAL is more than just another DSP drag-and-drop system. It
has revolutionized system design and installation.
Four HAL multiprocessors provide various audio I/O and
control options for both large and small installations.
„ HAL1x supports 16 in x 16 out audio, which may be in-
creased an additional 512 in x 512 out by adding EXP1x,
EXP3x or EXP5x Expanders. Up to 32 Expanders can be
daisy-chained to a single HAL1x. Add more mic inputs with
AM Automixers. Add AEC with the new EXP7x
5
6
7
8
1
2
3
4
ENABLED
DIGITAL REMOTES
1
2
IN
OUT
IN
OUT
5
6
7
8
OVERLOAD
1
2
1
2
1
2
1
SIGNAL
1
2
1
2
1
2
1
ENABLED
REMOTE AUDIO DEVICES
3
4
5
6
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
1
2
5
6
7
8
IN
OUT
IN
OUT
OVERLOAD
SIGNAL
ENABLED
REMOTE AUDIO DEVICES
5
6
7
8
9
10
11
12
MIC / LINE INPUTS
(Oct.
5
6
7
8
3
4
IN
OUT
IN
OUT
COMM
2
1
2
1
2
1
2
1
2
LINK
2
1
2
1
2
1
2
1
2
LINK
EXPANSION
ETHERNET
BUS
7
8
IN
OUT
IN
OUT
LINK
2
1
2
1
2
1
2
1
2
2
1
2
1
2
1
2
1
2
EXPANSION
BUS
1
2
3
4
5
6
EXPANSION
DIGITAL REMOTES
BUS
1
2
3
4
EXPANSION
DIGITAL REMOTES
BUS
1
2
3
4
5
6
7
8
EXPANSION
AEC CONFIGURATION BLOCKS
BUS
„ HAL2 supports 18 in x 18 out audio, of which 2 x 2 come
from AES3 on XLR connections.
„ HAL3 supports 4 in x 8 out audio, of which 2 "Line-Plus" In-
puts accept balanced line, or mono left/right unbalanced lines.
„ HAL4 supports 2 in x 2 out audio, of which 2 "Mic/Line-
Plus" Inputs accept balanced mic, line, or mono left/right
unbalanced lines.
See all four in the HAL System Data Sheet.
Halogen™ software includes Ethernet control support for third-
party control systems. Standard TCP/IP set and get ASCII text
messages control levels, selectors, presets and toggle actions within
Halogen. Since the same Halogen software code runs on both
Windows® and within HAL hardware, third-party control de-
velopers can test all their code using only the Halogen Windows
software. Use only software to test your control systems software
code and buy the hardware only when the install date arrives. See
the HAL System Data Sheet for screenshots and processing block
descriptions.
Download Halogen and design a system now!
rane.com/hal
Well-documented example programs for AMX, Crestron and
Stardraw Control ease programming headaches. These Support
Packages are installed with Halogen software, or available as
separate downloads.
2013).
HAL1x
Multiprocessor
EXP
HAL1x
HEURISTIC
AUDIO
LABORATORY
FAULT
LOCATE
POWER
STATUS
LOCATE
EXP1x
POWER
REMOTE AUDIO
EXPANSION
STATUS
EXP3x
ZONE
EXPANSION
STATUS
EXP5x
INPUT
EXPANSION
STATUS
EXP7x
AEC
EXPANSION
STATUS
(Oct.
2013).
Expansion
Data Sheet - 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the HAL1 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Rane HAL1 Series

  • Page 1 Download Halogen and design a system now! has revolutionized system design and installation. Four HAL multiprocessors provide various audio I/O and rane.com/hal control options for both large and small installations. „ HAL1x supports 16 in x 16 out audio, which may be in-...
  • Page 2 – – – – – – – POWER POWER MADE IN U.S.A. RANE CORPORATION EXPANSION BUS DIGITAL REMOTES REMOTE AUDIO DEVICES & DRs LINK ETHERNET LINK 100-240 V 50/60 Hz 55 WATTS 24 VDC @ 50 mA SHIELDED CAT5e OR BETTER...
  • Page 3 HAL1x Multiprocessor Expansion HAL1x Expansion Bus head-end of the daisy-chain. Star topologies are not supported — The HAL1x Expansion Bus supports up to 32 daisy-chained do not use Ethernet switches, they will not work. And since the Expanders in any combination. The Expansion Bus requires EXP3x &...
  • Page 4 FCC Rules. Operation is subject to the following two conditions: MADE IN U.S.A. (1) this device may not cause EXP1 RANE CORP. harmful interference, and (2) this AUDIO RX device must accept any interference received, including interference that AUDIO TX may cause undesired operation.
  • Page 5 – – – – – POWER POWER MADE IN U.S.A. RANE CORPORATION EXPANSION BUS DIGITAL REMOTES REMOTE AUDIO DEVICES & DRs LINK ETHERNET LINK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful...
  • Page 6 (300 feet). Use standard Ethernet Gigabit Media RAD2. Or, as shown on the facing page, a Rane PAGER1 Paging Converters within the daisy-chained Expansion Bus to achieve Station( ) instead supplies paging throughout many zones.
  • Page 7 – – – ACN 001 345 482 100-240 V RANE CORPORATION 50/60 Hz 25 WATTS MADE IN U.S.A. SHIELDED CAT 5e OR BETTER - 24 VDC @ 50 mA | 24 VDC @ 100 mA CLASS 2 WIRING Data Sheet - 7...
  • Page 8 EXP5x Euroblock. Select Line-Plus independently supports either dynamic mic, phantom mic, +4 and you get a properly monoed audio channel. dBu line-level, or Rane’s new Line-Plus input. Line-Plus accepts EXPANSION BUS DIGITAL REMOTES MIC / LINE-PLUS...
  • Page 9 – – – – – – UNBALANCED LINK LEFT & RIGHT ACN 001 345 482 MONO’ED 100-240 V RANE CORPORATION 50/60 Hz 25 WATTS MADE IN U.S.A. SHIELDED CAT 5e - 24 VDC @ 50 mA Data Sheet - 9...
  • Page 10: Specifications

    MADE IN U.S.A. NEW! EXP7x AEC Expander The Rane EXP7x Expander for the HAL1x provides 8 channels of Because EXP7x AEC channels are not associated with a particular full-featured, drag and drop Acoustic Echo Cancellation (AEC). hardware input, preset recall can re-assign an AEC resource across Each channel of AEC can be added to any HAL1x system input inputs / rooms as required.
  • Page 11 HAL1x Multiprocessor Expansion Conferencing Application In this scenario, if room acoustics are good, it is possible to use a This application has a number of microphones used in a room single AEC processing block for more than one microphone by with overhead sound reinforcement.
  • Page 12 HAL1x Multiprocessor Expansion After adding an EXP7x to a HAL1x, under the DSP Processing tab, new Conferencing blocks are offered. With the EXP7x added, eight AEC blocks may be placed. When these are used up, the offering is grayed out with the hover-tool-tip indicating a need to add another EXP7x to acquire more AEC blocks.
  • Page 13 HAL1x Multiprocessor Expansion Conference Room Combine Conferencing in a room combine environment is a complex task without a specialized Room Combine Processor designed to handle room mix, far-end mix and reference routing. Halogen's unique ability to do conferencing within a room combine scenario without complex wiring and routing makes it easy.
  • Page 14 HAL1x Multiprocessor Expansion OVERLOAD ENABLED DIGITAL REMOTES SIGNAL MIC / LINE INPUTS HAL1x HEURISTIC AUDIO LABORATORY COMM FAULT OVERLOAD LINK LOCATE OVERLOAD SIGNAL LINK POWER SIGNAL ENABLED EXPANSION LINE OUTPUTS REMOTE AUDIO DEVICES ETHERNET STATUS HAL1x Specifications Parameter Specification Limit Conditions/Comments 8 x 8 Analog I/O ...Connectors...
  • Page 15 – – – – – POWER POWER MADE IN U.S.A. RANE CORPORATION EXPANSION BUS DIGITAL REMOTES REMOTE AUDIO DEVICES & DRs LINK ETHERNET LINK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful...
  • Page 16 – – – ACN 001 345 482 100-240 V RANE CORPORATION 50/60 Hz 25 WATTS MADE IN U.S.A. SHIELDED CAT 5e OR BETTER - 24 VDC @ 50 mA | 24 VDC @ 100 mA CLASS 2 WIRING Data Sheet - 16...
  • Page 17 – – – – – – UNBALANCED LEFT & RIGHT ACN 001 345 482 LINK MONO’ED 100-240 V RANE CORPORATION 50/60 Hz 25 WATTS MADE IN U.S.A. SHIELDED CAT 5e - 24 VDC @ 50 mA Data Sheet - 17...
  • Page 18 HAL1x Multiprocessor Expansion DR4 Logic I/O Expander The DR4 Digital Remote adds additional logic input and output logic ins and outs, six IR ports and eight analog input ports for ports to any HAL, enabling simple analog level and logic I/O pot-on-a-wall level control.
  • Page 19 HAL1x Multiprocessor Expansion DR5 Switch Controller The DR5 Digital Remote offers additional logic input and CAT 5e output ports, enabling the use of simple analog switch controls 300 meters in any HAL system. Lighted switch panels for room combine 1,000 feet To a RAD or DR Port applications are easily integrated into a HAL system using the on any HAL...
  • Page 20 Trademarks • Heuristic Audio Laboratory (HAL)® • HAL and Halogen are trademarks of Rane Corporation • AMX® and the AMX logo are registered trademarks of AMX • Stardraw Control is a trademark of Stardraw.com Ltd. • Crestron® is a registered trademark of Crestron Electronics, Inc. • Decora® is a registered trademark of Leviton •...