Setting The Transmit Channel; Local Control On/Off - Yamaha EZ-TP Owner's Manual

Setting the Transmit Channel

This procedure sets the MIDI channel via which the EZ-TP data will be transmitted.
The possible settings are: off, 1 ~ 16.
1
Press the
2
Press the [MIDI] button.
3
Use the [-]/[+] buttons to select "off," or MIDI channel 1 ~ 16.
When "off" is selected no data will be transmitted by the EZ-TP.

Local Control ON/OFF

This setting determines whether the EZ-TP plays its own internal tone generator or
not.
on (on) : This is the normal setting, in which notes you play on the EZ-TP are sounded
by the EZ-TP itself. Also, all performance data (not including song playback)
is transmitted via the MIDI connector.
off (oFF) : Notes played on the EZ-TP are not sounded by the EZ-TP itself, but will be
sounded by an external MIDI tone module if the appropriate MIDI connec-
tions are made.
EZC (E2C) : Notes played on the EZ-TP are not sounded by the EZ-TP. This setting is provided
for future expansion.
The initial default setting is "on."
1
Press the
2
Press the [MIDI] button – the button will light.
3
Press and hold the [MIDI] button use the [-]/[+] buttons to
select "on" or "off."
NOTE • No sound will be produced by the EZ-TP when Local Control is set to either "off" or
"EZC." The internal EZ-TP tone generator will only sound when Local Control is
turned "on."
button so that the upper indicator lights.
button so that the upper indicator lights.
Connecting to MIDI Devices
on
EZ-TP Owner's Manual
31