Table of Contents
Advertisement
(English)
Additional references
Detailed information about how to configure this product is described in the reference guides listed below. These
guides are contained in the attached CD-ROM.
・
10Gb Intelligent L3 Switch Application Guide
・
10Gb Intelligent L3 Switch Command Reference Guide (AOS)
・
10Gb Intelligent L3 Switch Command Reference Guide (ISCLI)
・
10Gb Intelligent L3 Switch Browser-based Interface Reference Guide
Product Overview
The features of this product are briefly described below.
Features
The N8406-026 10Gb Intelligent L3 Switch is a Switch Module for the Blade Enclosure. The Switch Module is used
to connect the CPU Blade with the external network through the Ethernet port. The Switch Module has 16 ports
dedicated to CPU Blade, 4 uplink ports, and one port dedicated to management network. Four uplink ports can be
fiber using N8406-027 XFP modules.
■Supported technologies
・
Routing protocl
- static
- RIP v1, v2
- OSPF
・
VRRP
・
VLAN
- Port-based VLAN
- Tagged VLAN
・
Spanning Tree
- Spanning Tree Protocol (802.1D)
- Rapid Spanning Tree Protocol (802.1w)
- Multiple Spanning Tree Protocol (802.1s)
・
Link aggregation (Port trunking)
- static
- LACP
・
Uplink Failure Detection (Trunk failover feature)
・
QoS
・
Jumbo frames (up to 9216 bytes)
・
Port mirroring
・
IGMP Snooping (v1, v2, v3)
・
NTP client
・
DNS client
・
Syslog
・
SNMP v1, v2c, v3
・
RMON (Group 1,2,3,9)
22
Advertisement
Table of Contents
