Elation PROTEUS EXCALIBUR User Manual page 28

S YS T E M M E N U
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION!
NOTE: SAVED WHITE BALANCE IS ERASED AFTER A RESET IS PERFORMED!
This function restores all fixture settings to the factory default settings. The password is 011
and must be entered each time a reset is performed.
EFFECT ADJUST - Test Channel
Auto test each individual channel function independently from the DMX control board.
EFFECT ADJUST - Manual Control
Select and manually test and fine adjust each individual channel function Independently from
DMX control board. This function will center PAN and TILT motors and set dimmer to 100%.
PAN and TILT functions will still operate if the fixture needs to be positioned to a flat clear
surface. With the individual functions, you can focus the light on a flat surface (wall) and
perform fine adjustments.
EFFECT ADJUST - Calibration
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION.
This function allows small adjustments to be made to the Pan, Tilt, and Zoom movements to
compensate for ware or in the event a sensor has been knocked slightly out of place. Because
improper use of this function can result in undesired operation this function has been password
protected. The password is 050 and must be entered each time the calibration menu function
is entered. Because calibration is an extremely delicate procedure, instructions on performing
this action are left out of this manual. For a first-time calibrator, please contact our customer
support team for step-by-step instructions.
USER MODE SET - Edit User Mode
Create user defined channel orders allowing the fixture to match the channel order of other
fixtures on the market for easier operation. A total of three user modes may be configured:
User Mode A, User Mode B, and User Mode C.
EDIT PROGRAM - Rec. Controller
The fixture features an integrated DMX-recorder by which you can transmit the programmed
scenes from your DMX-controller to the moving head. Adjust the desired scene numbers via the
encoder (from – to). When you call up the scenes at your controller, they will automatically be
transmitted to the moving head.
28