Table of Contents
Advertisement
4.0 SCREWDRIVER CONTROLLER
035/E40V & 035/E32V / BECT940 / 832N-SSO Screwdriver
Controller – Operation Manual
4.1 IMPORTANT – INSTALLATION & SAFETY
1. Please read and understand the operation manual and follow all safety and operation instructions
2. Use these products in a suitable dry, indoor location. Do not use tools and controllers in damp, wet or
high temperature environments. Do not use in the presence of flammable liquids or gases.
3. Ensure that the controller has proper ventilation. Do not expose the tools and controllers to areas
subject to airborne contaminants (eg. dust, metal filings).
4. Use only a properly grounded electrical outlet of the correct supply voltage to power the screwdriver
controller.
5. Ensure that the supply outlet is overload protected and of sufficient amperage capacity.
6. Use only the correct plug for the controller and outlet. Hold the plug of the power cord when connecting
or disconnecting. Do not pull on the cable.
7. Do not expose the cable, tool or controller to oil, chemicals, or heat. Ensure that the cable is routed and
used in such a manner as to not be subject to sharp objects that may abrade or cut the cable.
8. Locate the controller in a suitable, safe location on a steady surface. Do not place in a high location
where there may be a risk of it falling. Secure the controller in position to prevent possible movement
caused by pulling on the power or tool cables.
12
CAUTION – Please read, understand, and follow
all operating and safety instructions in this
manual before using the035/40V & 035/E32V /
BECT832N / 940-SSO controller.
These controllers are designed for use exclusively
with the following Delta Regis Brushless Electric
Screwdrivers:
035/E32V / BECT832N-SSO:
035/E/A 32VDC / CESL8 series screwdrivers
035/E40V / BECT940-SSO: 035/E/A 32VDC and
40VDC / CESL8 series screwdrivers
Do not attempt to use these controllers with any
other tools
WARNING
Failure to understand and follow proper installation guidelines,
safety requirements, and operating instructions may result
in malfunction, component damage, property damage, shock
hazard, fire hazard, injury or death.
Advertisement
Table of Contents
