Advertisement
power cord or may cause the risk of fire.
18. If the supply cord is damaged, to reduce the
risk of malfunction it must be replaced by the
manufacturer, its service agent, or a licensed
and qualified professional.
19. Do not use this appliance with an extension
cord or outlet strip. Connect the appliance di-
rectly to a suitable outlet.
20. Make sure that the plug is fully inserted into
the outlet. Wall outlets may deteriorate with
time, so check the plug periodically for signs
of overheating or deformation. If the outlet
has deteriorated, stop using it and have it re-
paired.
21. Check that neither the appliance nor the po-
wer cord have been damaged during ship-
ping.
22. Make sure that no styrofoam or other packing
materials remain in the appliance.
23. The first time the appliance is used, run it at
the maximum power for at least two hours.
During this time, ventilate the room thorou-
ghly to eliminate the "new" smell released by
the appliance. It is completely normal for the
appliance to emit "creaking" sounds the first
time it is run.
24. CAUTION: To prevent electric shock, make sure
the wide prong of the plug is inserted in the
wide slot of the outlet.
25. Do not place the heater near a bed because
objects such as pillows or blankets can fall off
the bed and be ignited by the heater.
26. Extreme caution is necessary whenever the
heater is left operating unattended.
27. Do not open the appliance. No user-servicea-
ble parts inside.
SAVE tHESE
InStructIonS
tHIS Product IS For HouSEHoLd uSE onLY
description/use
dEScrIPtIon
(see fig. 1)
A
ON/OFF button
B
+/- Adjustment buttons
c
Oscillation button
d
"ECO" function button
E
Timer button
F
MODE button
(for selecting the operating mode)
G
Receiver for remote control
H
Power indicator light
I
Back cover
J
Filter
uSE
Installation
The appliance may be used on any rigid horizontal surface. Do
not overload the electrical circuit; avoid using the same outlet
for multiple appliances.
Electrical connection
Before connecting the plug to the power outlet, make sure
that the voltage of your electrical system corresponds to the
voltage shown on the appliance rating label and the outlet
you are going to use is in good condition.
operation and use
1. Connect the appliance to the power outlet.
2. The appliance emits a beep and the power indicator light
(H) comes on and remains on as long as the appliance is
powered.
3. The appliance goes into OFF. If the display shows a
blinking dot, it means that the tip over switch has been
activated. See paragraph: "Additional safety features".
4. Press the ON/OFF button (A) to turn on the appliance. It
will begin to heat with the predefined settings.
5. Press the MODE button (F) to select one of the following
functions available:
Ventilation
Anti-freeze
Heating at minimum power 1
Heating at maximum power/BooSt function (2)
5.1 Ventilation
In this operating mode only the fan operates, so the appliance
does not heat the room.
5.2 Anti-freeze
In this operating mode the appliance keeps the room at a
temperature of 45°F (7°C) to prevent freezing temperatures.
5
en
Advertisement
